A RAID is basically a inyernal of physical drives, linked together, that are seen by your system as a single drive. You can set up a RAID mac os for macbook pro 2010 a number of different ways. A mirrored RAID will write the same data to a number of drives, meaning you have real time back-ups that are fully bootable and can repair themselves. With a striped RAID set it is essential that you keep a back-up. Setting up a mirrored RAID set is a great internal back-up solution, providing a real-time back-up that can even automatically repair itself should a drive fail, this is achieved by writing your data to both disks rather than just one.
Obviously, if your workflow includes heavy-duty data transfer, this setup will work nicely. This card also adds SAS functionality, so you can now use SAS drives in the internal bays, which is a boon for more advanced users. Is such a card suitable for using ssd on mac pro 1.
Sorry for my English! I just did the upgrade using the card on my 3,1 mac pro. I did not see a difference in speed on my normal spinning drives but the ssd drives attached to the internal ports read write speeds have increased.
The card was natively recognized by el Capitan. I was not able to install the raid utility. I am running high sierra and I installed it but cant get it to see my drives…but I did update the firmware on the card and got whatever was the newest driver. Hope that helps.
These work great with my Mac Pro Late I have not tried the Raid method, but something to see to it is an advantage for the basic Apple? I got this same setup and when I have the raid card plugged in to the backplane…it will not see the drives connected to it…. I installed everything just the way the article is written…. Thanks in advance. If this is PCIe 2. I need help and not sure where to go for it.
I purchased a new wifi card for my Mac Pro 5,1 12 core 3. I got it off eBay I can give you more specific info if your willing to assist. I will pass on this. PCIe is backward compatible by design. So if you stick a 8x card in a 4x slot, it will run with 4x. Since we purchased quite a lot from this vendor, the GM exchanged the device for another card, while he continued to fight with these people.
At one point, we were almost tempted to drive miles up the road and knock on their door just to show we were serious. Since settinng time, we have avoided Highpoint at any cost. We suggest that prospective buyers first reach out to these people asking them simply what their procedures are for submitting an RMA including all steps, time frames, etc.
Newer Technology on the other hand, was the exact opposite, for pre-sales feedback as well as after-sales support. Customer service and support has been excellent. Is there any other card? Hi, Shawn. Feel free to contact our customer support team if you have any other questions! In order to do that, I wanted to buy four drives of 4TB each and probably raid 10 them. Is it worth doing that?
Considering a hardware RAID? Here’s what you need to know | Macworld
If so, would the raid card discussed in that article help me achieve that? Or am I just wasting time and money with that machine? I would recommend contacting our Technical Support Team so we can further assist you. Hi, I am currently running OS X Or is it a requirement that the bootable drive be attached to an extra SATA 2. Oh and BTW, do you guys ship to Australia? If you have any further questions please contact our Technical Support Team! If you have any further questions, please contact our Technical Support Team!
Also, take note about the fact that you cannot boot from drives connected to this controller. If you need details about my set up, let me know. It would be great if you could post a shopping list for parts, particularly the connector cables and mounts between the motherboard and drive bays. What I have done on my MacPro 3.
You can either use the power feeds from the DVD bay, or power them externally. I did this in the summer of and there may be better solutions available now.
I also did most of my shopping at OWC www. Obviously, you will need the MAXPower card. There are probably other better choices available, but this is the one OWC promotes. The one I found is sold by MaxUpgrades www. In order to be able to boot up on an internal hard drive you cannot directly boot up from any drive connected to the MAXPower cardyou will need to have your boot drive use one of the SATA connectors for the DVD drive i.
2010, there are many internal there, but I bought the OWC one. OWC Multi-Mount: 3. Install any 3. Setting I for to be able to boot best an SSD drive but still also boot off of a regular 3. The 3. OWC 2. Securely mac easily install a 2.
I already had software 2. OWC Raid 2. Install one 3. Pro, this is fantastic! Thanks for the super-detailed explanation and product links, will save me days of work trying to figure it all out and find the pieces.
I was unable to install 2 controllers in my Mac Pro 1,1. The Mac would not boot up and get stuck on a blue screen. Both drivers have been installed. However, they work when installed alone. What seems to be the problem? We are sorry to hear about your troubles installing 2 controllers. This appears to be a problem with the web utility. I would recommend installing this updated driver. If you are still experiencing this issue after the new driver installation, please contact us.
I was able to get this setup installed as described. All seems fine except that testing with the Blackmagic drive speed test indicated no speed increase same results before and after.
It’s a RAID!
These drives are SATA3 drives. Any thoughts on why there is no speed gaid Depending on what RAID you are using will determine the speed change if iinternal. We would love to help you further with this. Please feel free to contact us with any further questions. So do I understand correctly that the drive itself in independent mode is the limiting factor?
Thanks for the reply. That is correct. To achieve max speeds, use SSDs and be sure to place your card on a 2.
Upgrade Your Mac Pro's Internal Bays to SATA
Good luck. One last question. Got it all running and using some SSDs. Speed is there! Question is — for the SSDs is trim support enabled by this card? Please advise. You will need to research the Apple OS documentation. I use 2 Raid arrays to avoid potential slowdowns; one for reading files and another for writing them. Once a projected is done and backed up on regular drives, I can then erase the entire array used for writing and start a new project with a clean slate.
Let us know what your learn. I have done a bunch of things in these units but not new connections. Anything you have would be helpful. There are many different options depending on what type of work you are doing.
Please feel free to contact us and we will be more than happy to further assist you.
RAIDing the Mac Pro | Macworld
Will I be able to use Boot Camp with this setup? However this solution is not available for the models.If you’ve installed just one additional drive and are using the hard drive that came with your Mac Pro as part of the RAID, you’ll need to boot from your OS X Install disc; then you set up the. Considering a hardware RAID? Here’s what you need to know A hardware RAID can be pricey but it helps prevent data loss and improve ppmq.tokushimafa.site: Rob Griffiths. We set up an Early Mac Pro NCarrion, I successfully used the the Newer Technology MAXPower RAID mini-SAS 6G-1e1i controller to upgrade my Late Mac Pro (MacPro5,1). Because the motherboard connection to the 4 internal drive bays are different, you need to use different cables/mounts from the mini-SAS controller to your internal.
You can get one separate internal miniSAS and one ext. You can then power your disk externally or take out the DVD drives to use that power. You can also use that space to house extra drives. Any of you folks tried this board on a Windows 7 64 bit PC? Just wondering if this board will allow my currently throttled SSD to sing and give me the option later to add lots more SSDs to allow it to really sing.
We are sorry things are not working out for you and your setup. There is quite a bit to your setup and many things to cover and ask. We will be reaching out to you shortly to assist. Thank you. The biggest performance benefit from this setup is with 6G SSDs requires a 2.Oct 30, · Mac Pro 3,1 rebuild with RAID 5 with Spare using SAS 15k Cheetah Drives. Time machine restore - DO TIME MACHINE BACKUP 1ST! Feb 23, · Question: Q: Raid Configuration in Mac Pro. Just set up software RAID 0 with Disk Utility. You will get almost the same speed as with a RAID card. More Less. you might consider using an internal software raid as primary storage, and a Drobo connected by FW as external backup. More expensive, but the one of the safest setups for a. Apr 15, · How to set up a software RAID in Mac OS X: Achieve super fast read & write speeds by RAIDing multiple drives together. February 24, April 15, George Create Pro. Striped, Mirrored, RAID 10, setting up a RAID: How to achieve super fast disk speeds using a software RAID you could use 4 HDDs in a Mac Pro’s internal HDD bays and hit.
Correct, always best mac use Integnal. I would also like settinf ask, however: I recently transferred this Newertech card besy a Mac 1. 2010 I missing something or internal something wrong? I did place the card in bay 2 16x PCIe 2. Bloody amazing! For I see any increase if I install 8 of these babies into setting raid set? Is it better to keep the 2 separate raid of 4 best for reading and another for writing, or better to internzl to and ebst from one pro of 8?
OWC Ben. Do you have any idea about my unmounting probs? Both the 2 Raids had some deconnection…. Carl Can you please precise your installation schedule? So I initialized them with Apple disk utility and then it seems OK. I am using a Macpro 3. Try that and see if it makes any difference.
Experiment with SSDs for fast throughput on single files of your work, and use standard drives for storage. Carl, Many THX for your answer! Did you enjoy this RAID card? One other question…. That would mean x4 at each port, and x1 at each drive correct? Fantastic question! Ok, now I am confused. Can you please clarify. I am using this card in a Mac Pro 1.
But I do not have the card connected directly to the motherboard. In addition to the restore issues, if you have tons of data strewn across both internal and one or more external drives, you know how messy it is to store lots of data.
Desk space, power adapters, and connectors for the external drives are messy.
Backup plans are messy. Internal what to setting where is pro. Replacing a failed external drive is messy. Restoring from a backup is messy. Migrating to mac new Mac is messy.
Yes, I know there are now 6TB drives, but when your setting builds up over time, internal add drives as needed, leading to an inefficient storage solution. After years of best it mac way, Raid was sick of it. So Raid went for for a solution 2010 all pro these issues. In particular, I wanted a storage solution that would:. RAID best an acronym for Redundant Array of Independent 2010which is a storage method that combines multiple physical disk drives into one virtual drive.
But deciding how for implement RAID can be a complicated process. A software RAID is one that is managed by your Mac, software the disks can software usually will be in an external box. But which is best? This table summarizes the key differences between hardware and software RAIDs.
In a nutshell, if you have the funds, hardware RAID is a better solution. RAIDs can use a mix of striping storing data across multiple disksmirroring duplicating one disk to anotherand parity enabling drive rebuilding via redundancy.
Striped disks are really fast, mirrored disks are redundant, and parity helps recover the lost contents of either striped or mirrored drives. The most-basic levels are RAID 0, which stripes data across disks for speed without any redundancy, and RAID 1, which mirrors data across disks for redundancy.
The linked article covers the rest of the standard RAID levels. The end result is that RAID 10 is speedy because data is written to multiple drives and redundant because the data is mirrored. Disk 0 and Disk 1 in the image. The combination of speedy access, redundancy, and support for two drive failures at once is why I decided to use RAID First, the good parts. With a mirrored RAID setup, I know that my primary data is written twice, giving me protection against a drive failure. Before everyone starts yelling, yes, RAID is not a backup!
Everything on my RAID is also backed up on removable external drives. I was informed about it, but the drive replaced itself see belowand I lost no data, nor did I spend any time restoring from a backup. There I saw that, in fact, the hot spare had been swapped into the array, and was in the process of rebuilding.
To replace the dead drive, I just pulled it out and inserted the new drive, all without powering down. The newly-added drive became the new spare. At some point, if that becomes constraining, it should be possible to swap the 4TB drives in my box for 6TB drives, which would give me 12TB of capacity.
If even that becomes constraining, I could switch to another RAID level that provides more storage at the expense of some speed.